JSSC 2012-12 笔记


最近因为换工作和新的项目的原因,在这花的功夫少了很多,虽然晚了很多,还是简单的列一下12月的 jssc 论文的部分内容:

Design Techniques for Wideband Single-Bit Continuous-Time ΔΣ Modulators With FIR Feedback DACs

利用FIR DAC实现的结合多bit和1-bit结构的连续时间 ΔΣ Modulators,以及对于环路中的DAC引入延时的补偿的分析

A 1.7 mW 11b 250 MS/s 2-Times Interleaved Fully Dynamic Pipelined SAR ADC in 40 nm Digital CMOS

流水线结构的 SAR ADC 的设计,其中的 Dynamic residue amplifier 等

A DC-to-1 GHz Tunable RF ΔΣ ADC Achieving DR=74 dB and BW=150 MHz at f0=450 MHz Using 550 mW

可调的连续时间ΔΣ ADC的设计,其中的loop-filter的结构的分析

A 90-MS/s 11-MHz-Bandwidth 62-dB SNDR Noise-Shaping SAR ADC

噪声整形的SAR ADC,具体的charge-domain的 FIR Filter 的分析

A CMOS 5.37-mW 10-Bit 200-MS/s Dual-Path Pipelined ADC

关于其中的coarse-fine two-step amplification 以及 switching opamp 的方法

A 16-mW 78-dB SNDR 10-MHz BW CT ΔΣ ADC Using Residue-Cancelling VCO-Based Quantizer

利用 VCO 实现的连续时间ΔΣ ADC ,关于ADC中的VCO非线性问题的考虑

A 14.2 mW 2.55-to-3 GHz Cascaded PLL With Reference Injection and 800 MHz Delta-Sigma Modulator in 0.13 m CMOS

级联 PLL 的结构,使 Fractional-N PLL 工作于高频从而减小其噪声,同时对整数 PLL 也通过 reference injection 来减小噪声

An 8Ω 2.5W 1%-THD 104 dB(A)-Dynamic-Range Class-D Audio Amplifier With Ultra-Low EMI System and Current Sensing for Speaker Protection

关于dual-N cascode 的 driver 的考虑,load current sense 的分析,以及具体的 low EMI 实现的方法

Off-the-Line Primary Side Regulation LED Lamp Driver With Single-Stage PFC and TRIAC Dimming Using LED Forward Voltage and Duty Variation Tracking Control

关于具体的 LED controller 的分析:forward voltage tracking 和 duty variation tracking 方法

Analog Filter Design Using Ring Oscillator Integrators

利用环振实现的积分器,以避免普通的 Gm-C 积分器的直流增益的问题

A 19-Gb/s Serial Link Receiver With Both 4-Tap FFE and 5-Tap DFE Functions in 45-nm SOI CMOS

在 receiver 端实现的 Feed Forward Equalizer 和 Decision Feedback Equalizer 的结构


版权声明: 本站文章版权所有,转载须以超链接形式标明文章原始出处和版权信息。

发表回复

您的电子邮箱地址不会被公开。 必填项已用*标注